Take the panels off

Take the body off

Bezzera's manual says: if the machine is malfunctioning, do not try to repair it yourself; call technical assistance. Every BZ10 carries an anti-tamper seal that cannot survive opening the case, and Bezzera grants no warranty on a machine whose seal is removed or damaged (12 months from the invoice). Treat this as technician work.

Bezzera publishes no method. These steps are from TMT's video of a BZ10, read from the pictures. Taking the tank out is our addition, before the machine goes on its back.

1. Switch off, unplug and let it cool fully.
2. Take out the drip tray, the portafilter and the tank.
3. Lay the machine on its back on a cloth.
4. Undo the screws along the bottom edge of the body wrap with a long hex key.
5. Stand it up and lift the wrap (sides and back in one piece) up and back.
6. Lift off the top frame. The catalogue also draws screws at the top front.

Bezzera BZ10: every job