Drag to turn · scroll to zoom

Three-way valve

The three-way valve

Breville's US manual: "For any maintenance other than cleaning, call Breville Consumer Support." Sage's UK guide: "Any maintenance other than cleaning should be performed by an authorised Sage service centre." Opening the case is an unauthorised repair under Breville's and Sage's warranty terms and voids the warranty (1 year in the US and Canada, 2 years in the UK, EU and Australia). Wait until it has run out. Treat this as service-centre work: the methods shown are owners' and retailers', named where they appear.

Owner signs of a sticking valve: loud buzzing when 1 CUP or 2 CUP is pressed, with no water at the group until it stops (LAI); a lot of water collecting in the drip tray (Aju's Cafe); steam strong at first, then dying down (Caffeine Fix). A failing triac (the board part that drives the valve) can look the same (Home-Barista).

US kit: SP0100757 "Valve Solenoid Kit 120v" (O-rings not included); valve only SP0100759; hose O-ring SP0001672. The 230 V number was not found.

Take the valve out

Breville's US manual: "For any maintenance other than cleaning, call Breville Consumer Support." Sage's UK guide: "Any maintenance other than cleaning should be performed by an authorised Sage service centre." Opening the case is an unauthorised repair under Breville's and Sage's warranty terms and voids the warranty (1 year in the US and Canada, 2 years in the UK, EU and Australia). Wait until it has run out. Treat this as service-centre work: the methods shown are owners' and retailers', named where they appear.

Owners' method, with the top and back off.

  1. Pull the spring clips with pliers and lift the 3 hoses. Each has a red O-ring that may stay in the port.
  2. Cut the cable tie on the left-hand silicone hose.
  3. Note the wiring, then unplug the spade terminals on each side and the green earth.
  4. Remove the 2 small screws holding the L-shaped bracket.
  5. Lift the block off its two hooks and ease it out round the pump.
  6. Soak the metal parts (never the coils) overnight in descaler and brush them (Aju's Cafe), or fit a new kit.

Breville / Sage Barista Express: every job