Drag to turn · scroll to zoom

Steam wand deep clean

Take the frother apart and clear the holes

The manual: "For hygiene reasons, the frother should be cleaned after each use."

Release steam for a few seconds to push out the milk, then switch off at ON/OFF.
Let it cool for a few minutes. Hold the steam pipe, twist the frother anticlockwise and pull it down.
Pull the rubber nozzle down off the steam pipe.
Push the ring up and check the 2 holes are clear. Clear them with a pin.
Wash the nozzle and frother in warm running water (Get Started guide).
Refit the nozzle, slide the ring down, then push and turn the frother on until it clicks.